[shortdesc]

• Low viscosity and shrinkage
  
• Fast wet out
  
• Low odor
  
• Low amine content
  
• Use with a 2:1 or 4:1 hardener in fast, medium or slow.
  
• Ships within one business day

[/shortdesc]

[additional]DOWNLOAD: SDS 

[/additional]Details:

Proglas Epoxy Resin Part A is one part of a two-part system. It has low viscosity, low shrinkage, good chemical resistance and minimal odor.  Part A MUST be used with a 2:1 or 4:1 hardener. These hardeners come in fast, medium and slow to best fit the ambient temperature and desired pot life.  You can purchase Part A and Part B in a kit (2:1 epoxy resin kit, 4:1 epoxy kit) or separately (2:1 hardener, 4:1 hardener).

Uses:

-Yacht and boat construction and repair

-Vacuum bagging

-Ideal for high performance and light weight parts

-Adhesive for bonding fiberglass, wood, metal and some plastics

-Can be mixed with additives or filler to achieve thixotropic properties for high strength adhesives and reinforced compounds.

Application:

-For best results, the resin and work area should be between 75°F and 80°F.

-Wear proper safety clothing including gloves and googles.

-Make sure the surface is prepped before mixing resin.  It should be dry and free of contaminates such as dust and oils. 

-Accurately measure resin and hardener and thoroughly mix for proper curing and performance.

-Mix the resin and hardener for 3-5 minutes making sure to scrape the sides and bottom of the container.

-Apply using a fiberglass roller, brush, spreader or squeegee

Available Sizes:

Pint, Quart, ½ Gallon, Gallon, 5 Gallon

Handling and Storage:

Closed containers should be stored in a cool, dry place.  It should be stored at temperatures below 75°F and away from sunlight and heat sources.