ProGlas 1105 Deep Pour Epoxy Resin is a specialized epoxy designed for deep pour applications, allowing for a single pour depth of up to 2 inches. It is perfect for projects requiring thick layers, such as river tables, casting, and large encapsulations.

For best results, use ProGlas 1105 in a controlled environment with a temperature between 75°F and 85°F (24°C and 29°C) and a humidity level below 60%. Ensure that the working area is free from dust and other contaminants.

The mixing ratio for ProGlas 1105 is 2 parts resin to 1 part hardener by volume. It is crucial to measure accurately and mix thoroughly to ensure proper curing and optimal results.

The initial curing time for ProGlas 1105 is approximately 24-36 hours at room temperature. Full curing can take up to 7 days, depending on the thickness of the pour and environmental conditions.

 Yes, you can add pigments, dyes, or mica powders to ProGlas 1105 to achieve your desired color. Make sure to use compatible colorants and mix them thoroughly with the resin before adding the hardener.

To minimize bubbles, mix the resin and hardener slowly to reduce air entrapment. Use a heat gun or torch to gently pass over the surface after pouring, which helps to release trapped air. Additionally, ensure the working environment is at the recommended temperature to aid bubble release.

If the epoxy remains tacky, it may be due to an incorrect mixing ratio, inadequate mixing, or environmental factors such as low temperature or high humidity. Ensure you follow the instructions precisely and maintain the recommended conditions. If the surface remains tacky, you may need to sand it lightly and apply a fresh layer of properly mixed epoxy.

Store any unused resin and hardener in their original containers, tightly sealed, and in a cool, dry place. Avoid exposure to direct sunlight and extreme temperatures to maintain the product’s integrity.